DTMF tone/sequence decoder with 8 relays, 8 OCs and USB COM port
| Harga | Rp 1,00 |
| Ketersediaan Barang | Tak Terbatas |
Lebih Lengkap Mengenai DTMF tone/sequence decoder with 8 relays, 8 OCs and USB COM port
The DTD-16 Plus is a full-featured DTMF
tone/sequence decoder that is user programmable to decode single tones
or sequences up to six tones in length and maybe assigned to any one of
eight SPST normally open relays, eight open collectors and/or the USB
serial port.
The relays and open collectors may be programmed to
close for the duration of tone, pulse immediately after completion of
detection, wait a programmed (up to 9.99 seconds) length of time after
detection, or latch/unlatch.
Programming is performed using a non-dedicated PC’s USB port equipped with Windows HyperTerminal and/or Putty.
Features:
- Which accepts a balanced or unbalanced source.
- Surge protectedpower supply.
- Front panel status for power.
- Each relay.
- Valid DTMF tone.
- Serial data activity.
- Recessed programming push button with LED indicator and recessed input level control with a range of -20 to +24dbu.
- All connections are on removable screw terminals except for the USB Type B female port connector.
- The DTD-16 Plus may be set on a desktop, mounted on a wall or up to four units mounted on the RA-1.
- 1-RU mounting shelf.
