Active Studio Monitor
Harga | Rp 1,00 |
Ketersediaan Barang | Tak Terbatas |
Lebih Lengkap Mengenai Active Studio Monitor
The KH 310 D three-way active
tri-amplified monitor features a Mathematically Modeled Dispersion™
Waveguide (MMD™), flexible acoustical controls, various input options
(analog and digital) and an extensive range of mounting hardware. This
allows the loudspeaker to be used in diverse acoustical conditions, with
any source equipment and in a wide variety of physical locations.
The
KH 310 represents the latest in acoustic and electronic simulation and
measurement technologies to ensure the most accurate sound reproduction
possible.The KH 310 D is designed for use as a near-field monitor, as a
front loudspeaker in mid-sized multi-channel systems, or as a rear
loudspeaker in a larger multi-channel system. It can be used in project,
music, broadcast centers, OB vans, and post production studios for
tracking, mixing, and mastering.
The right sided Neumann KH 310 D
- Active Studio Monitor with Digital Input and Delay combines a 1"
titanium fabric dome tweeter, a 3" fabric dome midrange with a neodymium
magnet, and an 8.25" long throw composite sandwich woofer with an
extremely linear force factor and a ribbed surround, all powered by
class AB analog amplification.
The drivers were designed using
modeling techniques to minimize non-linear (inter-modulation)
distortion, and each driver has an independent thermo limiter to protect
the voice coils. It can be used as a near-field monitor, as a front
loudspeaker in mid-sized multi-channel, or as a rear loudspeaker in a
larger multi-channel system for project, music, broadcast centers, OB
vans, and post production studios for tracking, mixing, and mastering.
The
speaker features both analog and daisy-chainable digital BNC I/O for
flexible digital inter-connectivity (24 bit, 192 kHz, AES3, and
S/P-DIF). It also features digital Lipsync delay (from 0 to 10/12
frames) for aligning audio and video signals as well as digital
time-of-flight delay (from 0 to 400 ms) to compensate for different
listening distances.
The front panel is made from one piece
without discontinuities to reduce diffraction with protective metal
grills and the cabinet is made of magnetically shielded aluminum to
reduce resonances, improve heat dissipation, and extend the operating
lifetime of the unit.
The system delivers a free field frequency
response of 34 to 21,000 Hz with 4-position bass, low-mid, and treble
acoustical controls for tailoring the response to different rooms and an
input gain control from 0 to -15 dB. The front panel Neumann logo
functions as an LED indicator for power and clip/limiting but can also
be dimmed for light applications and for use when placed behind screens.
A variety of wall, ceiling, truss, subwoofer, stand, and surface
mounting options are available as well as transportation options through
a range of accessories (sold separately).
Features:
-Amplifier Woofer: 150 W (210 W peak)
-Midrange: 70 W (90 W peak)
-Tweeter: 70 W (90 W peak)
-Controller Design Analog, active
-Crossover Frequencies 650 Hz
-2,000 Hz
-Crossover Slope 24 dB/octave, 4th order
-Equalization Bass: 0, -2.5, -5. -7.5 dB
-Mid: 0, -1.5, -3, -4.5 dB
-High: +1, 0, -1, -2 dB
-Protection Circuits Independent thermo limiters for woofer, midrange dome and tweeter, woofer soft clip and excursion limiters
-Infrasonic filter protection 15 Hz; 6 dB/octave
-Input XLR, analog electronically balanced
-Impedance > 13 k Ohms
-Input Gain Control 0 to -15 dB
-Output Level Control 94, 100, 108, 114 dB SPL
-CMRR > 56 dB at 100 to 15,000 Hz
-Maximum Input Level 24 dBu (+18 dBu for analog delayed)
-Indicators Power On: Neumann logo "white"
-Limit/Clip: Neumann logo "red"
-Power Supply 100 to 240 V; 50/60 Hz
-Power Consumption Idle: 30 W
-Full Output AC: 300 W