Rackmount CD Player With Bluetooth Receiver

Rackmount CD Player With Bluetooth Receiver
Klik pada gambar untuk memperbesar
Harga
Rp 1,00
Ketersediaan Barang
Tak Terbatas

Lebih Lengkap Mengenai Rackmount CD Player With Bluetooth Receiver

The CD-200BT Rackmount CD Player With Bluetooth Receiver from Tascamallows you to playback CDs, CD-Rs, CD-RWs, and WAV, MP2 and MP3 data CDs in addition to audio from Bluetooth enabled devices. While you can only pair one Bluetooth device to the CD-200BT at a time, you can register up to 8 devices, allowing you to switch between them quickly. Bluetooth is only available to analog outputs and will not transmit via digital coaxial or optical outputs.

The CD drive itself is designed and built by TEAC and features a 10-second shockproof memory, keeping your playback protected from vibrations and CD skips. The CD-200BT also has an auxiliary 3.5mm stereo mini-jack input for integrating another sound source. The unit has a variety of output options including stereo analog RCA outputs and digital coaxial and optical outs. A front-panel 1/4" headphone output with independent volume control allows you to use the CD-200BT for personal listening. The unit can be controlled with the included remote control and is rackmountable with the included rackmount screw kit.

Through the antenna located in the front of the CD-200BT, audio file playback signals can be received from a variety of Bluetooth compatible devices. The types of files that can be played back depend on the transmitting device; so any file type that can be played back by iTunes, Windows Media Player, smartphone player apps and other music applications can be played through this unit. Bluetooth playback uses a wireless connection, so no new wiring is necessary to use compatible audio sources as long as they are in signal-range, allowing easy and speedy playback.

Bluetooth playback requires pairing. Normally, pairing is one to one, but the CD-200BT has a device selection function that can be used to pair with multiple transmitting devices. By registering devices to be used in advance, you can switch smoothly between transmission devices for playback with minimal connection interruption time (only one device can be used for playback at a time). In addition, since the name of the transmission device currently being used for audio playback can be shown on the display, you can check the connection status within this unit.

Features:

-Playback Media Formats CD, CD-R, CD-RW; 3 or 4", 8 or 12 cm
-Playback Formats CD-DA: Stereo, 44.1 kHz, 16-bit
-WAV (Data CD): Stereo, 8, 16, 32, 11.025, 22.05, 44.1, 12, 24, 48 kHz, 16-bit
-MP2 (Data CD): Stereo, 32, 44.1, 48 kHz; 32 to 384 kbps
-MP3 (Data CD): Stereo, 32, 44.1, 48 kHz; 32 to 320 kbps, VBR
-Auxiliary Input Connector: 1/8" (3.5 mm) stereo mini jack
-Input Impedance: 22 kΩ
-Nominal Input Level: -20 dBV
-Maximum Input Level: -4 dBV
-Analog Output Connector: 2x RCA pin-jack
-Output Impedance: 200 Ω
-Nominal Output Level: -10 dBV (0.32 Vms)
-Maximum Output Level: 6 dBV (2.0 Vms)
-Digital Output Coaxial:
-Connector: RCA pin-jack
-Format: IEC60958-3 (S/PDIF)
-Optical:
-Connector: TOS (JEITA RC-5720C)
-Format: IEC60958-3(S/PDIF)
-Bluetooth Version: 3.0
-Output Class: Class 2
-Supported Profile: A2DP, AVRCP
-Supported A2DP Codec: SBC, AAC, aptX
-Supported Contents Protection: SCMS-T
-Headphone Output Connector: 1/4" (6.3 mm) stereo jack
-Maximum Output Level: 20 mW + 20 mW (THD 0.1%, 32 Ω loaded)
-Frequency Response 20 Hz to 20 kHz, +/-1 dB (playback, JEITA)
-Distortion 0.01% or less (playback, JEITA)
-Signal to Noise Ratio 90 dB or greater (playback, JEITA)
-Dynamic Range 90 dB or greater (playback, JEITA)
-Channel Separation 90 dB or greater (playback, JEITA)
-Power North American: AC 120 V, 60 Hz
-Europe: AC 230 V, 50 Hz
-Australia: AC 240 V, 50 Hz
-Power Consumption 11 W
-Operating Temperature (5 to 35°C)