ATI Quad 1x4 Distribution Amplifier with Clipping Indicator
| Harga | Rp 1,00 |
| Ketersediaan Barang | Tak Terbatas |
Lebih Lengkap Mengenai ATI Quad 1x4 Distribution Amplifier with Clipping Indicator
Minimum cost, maximum versatility. A
small price to pay for real protection. Two or four inputs, each driving
four individually adjustable, active balanced outputs gives you twice
the channels for the price - twice the performance in most applications.
Need more outputs? Just parallel inputs for up to 1x16 operation. Drive
everything from balanced 600 ohm lines to Hi-Z IHF phono jack inputs
without matching pads or noise compromises. Transparent performance, RF
protected. ATI's best seller - your best buy.
Sixteen balanced
outputs divided among two or four independent 1 in to 4 out channels.
Parallel inputs on rear connectors for 1x8, 2x8 or 1x16 operation.
Individual wide range audio taper output level controls smoothly adjust
outputs from +8 to -10dBm with taper to full off. Separate LEDs for each
1X4 channel indicate either output clipping (standard) or input signal
presence (special order).
Features:
-Output Level +24dBm into 600 Ohm Balanced Loads
-Total Harmonic Distortion (THD) 0.001% Typical, 20Hz - 20kHz
-Slew Rate 13V/mS
-Frequency Response 30Hz - 20kHz, ±0.25dB
-Noise -100dBm EIN, 20Hz - 20kHz
-Gain 20dB Max, Each Output has 40dB Smooth Adjustment Range Going to Full Off
-Crosstalk 70dB Min @ 1kHz
-Output Impedance 400 Ohms Balanced, 200 Ohms Single-Ended, Split and RF Bypassed, AC Coupled
-Input Impedance 30 kOhms Active Balanced, Split and RF Bypassed
-Connectors 4 x Euroblock Inputs
-16 x Euroblock Outputs
-Hum Rejection 70dB CMR @ 60Hz
